Copper Roofing in Round Rock

We install, replace and repair copper roofs for homeowners in Round Rock, Texas. That can mean a full standing seam roof or a copper canopy over a porch or bay window. Every job starts with the roof’s shape, its condition and the look you want.

The big choices are the seam layout, the flashing, how the copper will weather and how new copper meets the roof you have now. We go through each one with you, for new work and for a leak that keeps coming back.

Bright copper standing seam roofs above a bay window and entry porch on a limestone home
Standing seam copper roof installationCopper roof replacementCopper roof leak and seam repairCopper flashing and roof transitionsPorch and entry copper roofsBay window and dormer copper roofsCurved and flat seam copper roofing

Residential copper roof installation, replacement & repair

Copper standing seam roof across a limestone home with gabled roof sections

Standing seam copper roof installation

On a new home or addition, standing seam copper gives long, clean lines across the roof. We plan the panel layout and the hidden clips, and allow for the copper moving as it heats and cools. Our quote states the copper weight, underlayment and edge details, so you are pricing a complete roof, not panels alone.

Copper roof replacement

Replacing an old copper roof, or switching another roof to copper, starts below the surface. The deck, the tear-off, the places where roofs meet and the drainage all change the job. We mark which sections need replacing and which can stay, especially where a new accent roof joins shingles, slate or another metal.

Weathered copper roof panels and flashing beside a limestone chimney

Copper roof leak and seam repair

We find the cause of a leak before we pick a repair. We look for open seams, damaged copper, failed joints and water coming in from surfaces next to the roof. Tell us when the leak shows up and send photos from inside and from the ground. A patch and a wider replacement fix different problems.

Copper flashing and roof transitions

Chimneys, valleys, walls and roof edges need flashing that sends water onto the roof and away from weak joints. We fit copper flashing as part of a new roof or as a repair on its own. We check the metals nearby and where the water runs, because copper reacts with some metals wherever they touch or take its runoff.

Copper accent roof installation

Limestone house with a copper-clad roof over a tall glass bay, under live oaks

Porch and entry copper roofs

A copper porch or entry canopy brings in copper without changing the whole main roof. On an existing porch, we check the pitch, how it is tied to the house and where the water drains before choosing a seam pattern. We include the fascia and edge finishes, so the small roof looks right from the porch as well as from the street.

Bay window and dormer copper roofs

Bay window caps and dormer roofs need careful proportions, because their seams sit right beside the windows and trim. Give us the shape, rough size and what the wall is made of. We work out the corners and wall joints along with the copper you see; a decorative cap still has to keep the rain out.

Curved copper canopy above an arched window on a limestone wall

Curved and flat seam copper roofing

Curved canopies, rounded dormers and small low-pitch roofs often need a different panel layout from a plain standing seam roof. Copper can be formed into these shapes, and we choose the seams and soldering to suit the slope and exposure. Send drawings or reference photos so we can work out how to form and fit it.

Copper roofing costs

These ranges cover hired labor and copper for typical jobs in Round Rock and nearby towns, from one dormer to a whole roof. The low end is a simple shape on sound decking. The open top end is where steep or curved roofs, heavier copper, rotten decking or long flashing runs come in. Copper prices also move with the metal market.

Standing seam copper roofs

  • Low roof section, about 300 sq ft (garage, addition or porch)$7,500 – $15,000+
  • Whole roof, about 1,700 sq ft$42,000 – $68,000+
  • Large or steep roof, about 3,000 sq ft$75,000 – $125,000+
What is included

The old roof taken off, underlayment, 16 oz copper standing seam panels, copper flashing and trim, and cleanup. Rotten decking and very steep roofs cost extra.

Get a free quoteSee an example projectAbout this service

Porch and entry roofs

  • Door canopy or small entry roof, about 50 sq ft$1,000 – $2,000+
  • Front entry porch roof, about 120 sq ft$2,000 – $5,000+
  • Full-width front porch roof, about 250 sq ft$4,500 – $10,000+
What is included

The old porch roof covering taken off, underlayment, copper panels, wall flashing where the porch meets the house, and edge trim. Gutters and repairs to the framing are extra.

Get a free quoteSee an example projectAbout this service

Bay window and dormer roofs

  • Small bay window roof, up to about 40 sq ft$2,000 – $5,000+
  • Large, curved or cone-shaped bay roof$5,000 – $10,000+
  • One dormer roof, or two small ones, about 50 sq ft in all$1,200 – $2,500+
What is included

A copper roof shaped to one bay window or dormer, with underlayment, flashing where it meets the wall or main roof, and edge trim.

Get a free quoteSee an example projectAbout this service

Curved and flat seam copper

  • Small curved or low-slope roof, about 100 sq ft (bay, canopy or eyebrow)$3,500 – $8,000+
  • Flat seam roof section, about 400 sq ft$14,000 – $22,000+
  • Curved or flat seam main roof, about 1,500 sq ft$50,000 – $85,000+
What is included

Copper pans shaped in the shop and joined with folded or soldered seams, for low, curved or rounded roofs, plus underlayment, flashing and edge trim.

Get a free quoteSee an example projectAbout this service

Copper flashing

  • One valley or roof-to-wall junction, about 15 ft$600 – $1,200+
  • Copper flashing for one chimney$1,100 – $2,200+
  • Several junctions during a roof job, about 100 ft$2,000 – $3,500+
What is included

Old flashing taken out, new copper step, counter, valley or wall flashing fitted, and the roof covering around it closed up again. Masonry repair is extra.

Get a free quoteSee an example projectAbout this service

Ranges are 2026 estimates, not quotes. Call today for a free, personalized quote.

Our process

01

Define the work

Send us the address, a few photos and whether you want a new roof, a replacement, a repair or an accent. Mention any leaks, old patches and drawings you have.

02

Review the roof and details

We come out to check the deck, slope, connections and drainage, agree the seam pattern and finish with you, and confirm any approvals your property needs before ordering copper.

03

Agree on a written quote

Our written quote lists removal, preparation, copper, flashings, access and cleanup, along with the schedule and who handles any approvals.

Choose copper for how it will weather

Bare copper starts out bright and slowly changes color. How it ends up depends on exposure, which way the roof faces and the local weather, so nobody can promise green by a set date. If the look matters most, compare finish samples, and check whether a product is solid copper or another metal with a copper-colored coating.

Plan runoff around stone and other metals

Water running off copper can stain light stone, including limestone, and eat at some metals below it. When a copper canopy sits above stone or other metal, we pay attention to drip edges, gutters and where the water lands, and we show you how the detail handles that water before you sign off on the look.

Round Rock and nearby project locations

We work in Round Rock, Texas, and take jobs in Pflugerville, Hutto, Georgetown and Cedar Park. Give us the exact address so we can confirm availability and travel. If your house has historic overlay zoning, we check Round Rock’s review rules before changing the roof material; ordinary repairs that keep the same materials and design are treated differently.

Frequently asked questions

Can I add copper to just one part of my roof?

Yes. A porch, bay window or dormer can have copper while the main roof keeps another material. We still plan the joint, the drainage and how the two materials work together as one job.

Does a green copper roof need to be replaced?

No. A change of color does not mean the roof has failed. Patina is part of copper’s natural weathering. If you see leaks, damaged seams or other faults, we look at the roof itself rather than judging it by its color.

What goes into a copper roofing quote?

Our quote lists the copper weight, seam system, preparation, flashing and removal work. Access, tricky shapes and hidden deck damage can change the job, so we agree with you how any extra work is written up before it goes ahead.

Request a free copper roofing quote

Tell us about the roof or accent, where it is and what you would like to change. Rough sizes, photos and any leak history help us look at the job properly. Send your project details using the form below.

Call (737) 237-8228