Copper Roof Flashing and Transitions in Round Rock

Typical cost in Round Rock

  • One valley or roof-to-wall junction, about 15 ft$600 – $1,200+
  • Copper flashing for one chimney$1,100 – $2,200+
  • Several junctions during a roof job, about 100 ft$2,000 – $3,500+

Where a roof meets a chimney, a wall, a valley or another roofing material, the flashing has to carry the water away. We flash those joints in copper, as a repair or as part of a new copper roof, and we treat the water’s path and the roofing around it as one job.

We work mostly in Round Rock. If the leak is in Pflugerville, Hutto, Georgetown or Cedar Park, include your address and we’ll let you know whether we can get there.

Weathered copper roof panels and flashing beside a limestone chimney

Copper flashing applications

Describe the whole joint and the materials around it, so we can follow the water’s path through the roof.

Copper porch roof meeting a limestone gable, with copper valley and ridge seams

Chimney and wall junctions

Where roofing turns up against masonry or a wall, the flashing has to handle water from both surfaces. Let us know what the roof and the wall are made of, and point out any old patching or gaps you can see. We work out whether the problem is at the roof joint or water coming in higher up the wall or chimney. We tell you which materials next to it we lift or remove to reach the joint, and how we put them back.

Valleys and intersecting roof planes

A valley gathers the water from two roof slopes. Its condition, its shape and how it joins the roofing matter as much as the metal you see. We follow the whole valley down to the outlet at the bottom, however small the damage looks. New valley metal can mean work on the roofing beside it, and we tell you what can stay and what needs new matching material.

Bright copper standing seam roofs above a bay window and entry porch on a limestone home

Copper-to-other-material transitions

A copper accent often meets shingles, slate, another metal or a pale stone wall. Each of those joints needs materials that suit each other and a planned path for the runoff. Two metals touching is one problem; water running off one onto the other is another. We check nearby gutters, fasteners and surfaces too, because some existing parts may have to change once new copper goes on.

Diagnosis comes before choosing the patch

Where a stain shows inside is not always where water gets into the roof. Note when the leak happens and anything that changed recently, and we’ll check the joints around it. We explain what we think is causing it, which flashing we renew and what nearby work the repair needs. A patch smeared over a seam is a different job from rebuilding a failed joint. The metals and fasteners we use have to suit the roof, and the materials that stay can limit the choices. We tell you whether the repair can be done on its own or the roofing next to it needs renewing at the same time, because that decides how much comes off and goes back.

Get a quote for your copper roof flashing and transitions project

Photos from outside and of the leak inside, plus a note on when water shows up, help us most. Add the roof and wall materials, past repairs and the address.

Request a free quote

View contact details

Call (737) 237-8228

Get a quote for your project

Call (737) 237-8228